PRONAR T679/5, Operator'S Manual, Page: 102 / 116

PRONAR T679/5 SECTION 5
5.30
TABLE 5.4 Recommended lubricants
MARKING
ACC. TO
TAB. (5.3)
DESCRIPTION
A Machine general-purpose grease (lithium, lime).
B Grease for heavily loaded elements with addition of MoS
2
or graphite.
C Anti-corrosion and penetrating preparation in aerosol.
Empty grease or oil containers should be disposed of according to the recommendations of
the lubricant Manufacturer.
TIP
Number of lubrication points and subassemblies requiring lubrication specified
in table (5.4) LUBRICATION SCHEDULE depend on the trailer version.
Locations of grease nipples and areas requiring lubrication are indicated by
black arrows in figure (5.14).
5.6.1 CONSUMABLES
Hydraulic oil
Always adhere to the principle that the oil in the trailer hydraulic system and in the tractor
hydraulic system are of the same type. In the event of application of different types of oil
make certain that both hydraulic substances may be mixed together. Application of different
oil types may cause damage to trailer or tractor. In a new machine, the hydraulic system is
filled with L HL32 Lotos hydraulic oil.
If it is necessary to change hydraulic oil for another oil, check the recommendations of the oil
Manufacturer very carefully. If it is recommended to flush the system with the appropriate
preparation, then comply with these recommendations. Attention should be given, so that
chemical substances used for this purpose do not damage the materials of the hydraulic
system. During normal trailer use, change of hydraulic oil is not necessary, but if required,
this operation should be entrusted to a specialist service point.