PRONAR T679/5 Operator'S Manual Download Page 113

Page: 113 / 116

SECTION 5

PRONAR T679/5

5.41

FAULT

CAUSE

REMEDY

Worn tyre tread.

Damaged suspension
system, broken leaf spring.

Damaged brake system,
blocking of brakes,
incorrectly adjusted brake
system. Too frequent and
violent braking.

Check suspension system for
looseness, check leaf springs.
Replace damaged or worn
elements.

Check brake system for
malfunctions. Adjust expander
lever.

Side crack.

Prolonged use of tyre with
low air pressure.

Excessive loading of the
trailer.

Regularly check air pressure in
tyres.

Check weight of load while
loading.

Abrasions on external
side edge of tyre.

Too frequent driving over
sharp or high obstacles
(e.g. curbs).

Control driving technique.

Damaged rim (hardening
and cracking near rim),
brittleness of tyre.

Incorrect braking technique.

Too frequent violent
braking.

Damaged brake system.

Check brake system.

Control braking technique.

Damage occurs due to excessive
heating of hub which leads to
heating of wheel.

Summary of Contents for T679/5





















































































































Search results

Summary of Contents for T679/5

Reviews:

PRONAR T679/5, Operator'S Manual, Page: 113 / 116

Search results

Summary of Contents for T679/5

Reviews: