PRONAR T679/5, Operator'S Manual, Page: 109 / 116

SECTION 5 PRONAR T679/5
5.37
If necessary, rotate the drawbar (1) by 180 degrees and set it in a new
position.
Tighten the bolts (5) using the correct torque according to table (5.7).
The design of the drawbar (1), and the faceplate (2) allows the three
settings (I) (II) (III).
Set and mount the rotating drawbar eye (3), or fixed drawbar eye (4) in the
appropriate position.
The design of drawbar (1) allows two settings of the drawbar hitching
eye.
5.11 ADJUSTMENT OF TAILGATE POSITION
FIGURE 5.17 Adjustment of tailgate position
(1) hydraulic tailgate, (2) pressure adjustment, (3) adjustment nut, (4) nut, (5) slide