Promise Technology VTRAK M210i, Product Manual

Page: 271 / 318

Chapter 8: Troubleshooting
257
Blowers are functioning
normally Normal.
Blowers are NOT installed Reinstall the cooling unit(s). If the blowers does not
turn, replace the blowers. See page 205.
Blower status is unknown Check for airflow out of the cooling unit. If there is
none, check for proper installation.
Cache
BBU flushing has started VTrak’s cache is being flushed.
BBU flushing has ended
VTrak’s cache has been flushed.
BBU flushing has failed VTrak’s cache could not be flushed. Check your
cache flush interval setting. See page 93.
Controller
The controller
parameter(s) changed by
user The user successfully change controller settings. See
page 93.
The controller has new
crash information Check the event logs. See page 48.
Controller temperature is
above the threshold/
warning threshold The VTrak controller is overheating. Check for airflow
around and through the controller, and verify that all
fans are working. Replace fans as needed.
Controller temperature is
above the critical
threshold The VTrak controller is seriously overheating. Check
for airflow around and through the controller, and
verify that all fans are working. Replace fans as
needed.
Disk Array
New disk array has been
created Result of settings or user action. Normal.
Disk array has been
deleted Result of settings or user action. Normal.
Disk array has been
added Result of settings or user action. Normal.
Disk array has been
removed The physical drives of the disk array were removed
from the enclosure.
Disk array settings have
been changed The user successfully disk array settings. See
page 111.
Reported Event Corrective Action