Chapter 4: Management with WebPAM PROe
91
Managing Controllers
The RAID controller is are the heart of the VTrak subsystem. Controller
Management includes the following functions:
•
Viewing the Controller (page 91)
•
Locating a Controller (page 91)
•
Viewing Controller Information (page 92)
•
Viewing Controller Statistics (page 93)
•
Making Controller Settings (page 93)
Viewing the Controller
To view information about the controller:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Controllers
icon.
The controller information appears under the Information tab in Management
View. Controller information includes:
•
Controller ID (1)
•
Alias, if assigned
•
Model, if applicable
•
Status – OK means normal
•
Readiness Status – Active or Standby
•
Locate – Click the button to locate the controller. See below
VTrak subsystems, such as the M610i, M310i, and M210i, with only one
controller will always show that the second controller is “Missing.”
Locating a Controller
To identify a specific controller in the VTrak subsystem:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Controllers
icon.
3.
In Management View, click the
Locate Controller
button.
4.
The Controller Dirty Cache
LED and Status
LED, on the back of the
Controller, will flash for one minute. See the illustrations below.
Summary of Contents for VTRAK M210i
