Promise Technology VTRAK M210i Product Manual Download Page 193

Page: 193 / 318

Chapter 5: Management with the CLU

179

Working with LUN Mapping

For iSCSI, LUN Masking is the process of applying a LUN Map so that each
initiator can only access the LUNs specified for it.

Features include:
•

Viewing Initiators (page 179)

•

Enabling LUN Mapping (page 179)

•

Creating Initiators (page 179)

•

Deleting Initiators (page 180)

•

Mapping LUNs to Initiators (page 180)

Viewing Initiators

To view a list of iSCSI initiators:
1.

From the Main Menu, highlight

Additional Info and Management

and press

Enter.

Highlight

LUN Mapping

and press Enter.

A list of the current initiators appears.

LUN Mapping must be enabled in order for VTrak to recognize the initiator. If LUN
Mapping is currently disabled, highlight

Enable LUN Mapping

and press Enter.

Enabling LUN Mapping

In the CLU, LUN masking is called “LUN mapping.”

To enable LUN Mapping:
1.

From the Main Menu, highlight

Additional Info and Management

and press

Enter.

Highlight

LUN Mapping

and press Enter.

Highlight

Enable LUN Mapping

and press Enter.

Creating Initiators

To create a new iSCSI initiator:
1.

From the Main Menu, highlight

Additional Info and Management

and press

Enter.

Highlight

LUN Mapping

and press Enter.

Highlight

Create New Initiator

and press Enter.

Type the name of the initiator.

Summary of Contents for VTRAK M210i































































































































































































































































































































Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands

Promise Technology VTRAK M210i, Product Manual

Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands