Promise Technology VTRAK M210i Product Manual Download

Page: 49 / 318

Chapter 3: Setup

For iSCSI, use the 512 B default.

12. Specify a Read (cache) Policy from the dropdown menu.

Read Cache, Read Ahead Cache, and No Cache are available. Read Ahead
is the default.

13. Specify a Write (cache) Policy from the dropdown menu.

Write Back and Write Through (Thru) are available. Write Back is the default.

14. Click the

Update

button.

A new logical drive is displayed under New Logical Drives.
Repeat the above steps to specify additional logical drives as desired.

15. When you are done specifying logical drives, click the

Next

button.

Step 3 – Summary

The Summary lists the disk array and logical drive information you specified.

16. To proceed with disk array and logical drive creation, click the

Submit

button.

Logging out of WebPAM PROe

There are two ways to log out of WebPAM PROe:
•

Close your browser window

•

Click

Logout

on the WebPAM PROe banner

Figure 5. Clicking “Logout” on the WebPAM PROe banner

Clicking

Logout

brings you back to the Login Screen. See page 30.

After logging out, you must enter your user name and password in order to log in
again.

Summary of Contents for VTRAK M210i































































































































































































































































































































Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands

Promise Technology VTRAK M210i, Product Manual

Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands