Promise Technology VTRAK M210i Product Manual Download

Page: 61 / 318

Chapter 4: Management with WebPAM PROe

Working with Subsystems

A VTrak subsystem is identified by its Management Port IP address. Subsystem
functions include:
•

Viewing Subsystem Information (page 47)

•

Setting an Alias for the Subsystem (page 47)

•

Setting Subsystem Date and Time (page 48)

•

Viewing the Runtime Event Log (page 48)

•

Saving the Runtime Event Log (page 49)

•

Clearing the Runtime Event Log (page 49)

•

Viewing NVRAM Events (page 49)

•

Saving NVRAM Events (page 50)

•

Clearing NVRAM Events (page 50)

•

Viewing Current Background Activities (page 50)

•

Making Background Activity Settings (page 51)

•

Running Background Activities (page 52)

•

Running Media Patrol (page 52)

•

Running PDM (page 52)

•

Viewing Scheduled Activities (page 53)

•

Scheduling an Activity (page 53)

•

Deleting a Scheduled Activity (page 54)

•

Viewing Lock Status (page 54)

•

Setting the Lock (page 55)

•

Renewing the Lock (page 55)

•

Releasing the Lock (page 55)

Viewing Subsystem Information

To view information about a subsystem, click the Subsystem

icon in Tree

View. Management View displays the subsystem information.

Setting an Alias for the Subsystem

An alias is optional. To set an alias for this subsystem:

In Tree View, click the Subsystem

icon.

In Management View, click the Settings tab.

Enter a name into the Alias field.

Summary of Contents for VTRAK M210i































































































































































































































































































































Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands

Promise Technology VTRAK M210i, Product Manual

Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands