Promise Technology VTRAK M210i, Product Manual, Page: 107 / 318

Chapter 4: Management with WebPAM PROe
93
Viewing Controller Statistics
To view controller statistics:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Information tab in Management View and choose Statistics from
dropdown menu.
Clearing Statistics
To clear statistics, see “Clearing Statistics” on page 88.
Making Controller Settings
To make Controller settings:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click the Controller icon.
4. Click the Settings tab in Management View.
5. Make the following settings as needed:
•
Enter a name into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between
words, and underscore. An alias is optional.
• Check the SMART Log box to enable the Self-Monitoring, Analysis, and
Reporting System (SMART).
• Enter a polling interval (1 to 1440 minutes) in SMART Polling Interval
field.
• Check the Coercion Enabled box to enable disk drive capacity coercion.
When disk drives of different capacities are used in the same array,
coercion reduces the usable capacity of the larger disk drive(s) in order
to match the smallest capacity drive.
For more information, see “Capacity Coercion” on page 233.
• Select a coercion method from the Coercion Method dropdown menu.
The choices are:
GB Truncate – (Default) Reduces the useful capacity to the nearest
1,000,000,000 byte boundary.
10GB Truncate – Reduces the useful capacity to the nearest
10,000,000,000 byte boundary.