Promise Technology VTRAK M210i Product Manual Download Page 219

Page: 219 / 318

Chapter 6: Maintenance

205

Figure 2. Replacing a M310i/M210i power supply

This completes the power supply replacement procedure.

Replacing a Cooling Unit Fan or Blower

The fan or blower in each cooling unit is replaced as an individual part. No tools
are required for this procedure.

To replace a fan or blower:
1.

Verify that the Fan LED is amber or red.

Figure 3. Fan LED (left: M610i, right: M310i/M210i)

Press the release button and pull the handle downward. See Figures 4
and 5.

Pull the cooling unit out of the VTrak enclosure.

Fan LED

Summary of Contents for VTRAK M210i































































































































































































































































































































Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands

Promise Technology VTRAK M210i, Product Manual

Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands