![background image](http://html.mh-extra.com/html/promise-technology/pegasus32-r4/pegasus32-r4_product-manual_1617249198.webp)
182
Promise
Technology
Pegasus32 R4/R6/R8
Drive Carrier LEDs
The Pegasus unit spins up the disk drives sequentially to equalize power draw during start-up. After a
few moments:
•
The Power / Status LEDs turn blue.
•
The Activity LEDs turn blue if a drive is installed.
The drive carrier Power / Status LEDs report the condition of the physical drives. See the table below.
See “Physical Drive Problems” on page 106 for a discussion of rebuilding and failed physical drives for
more information.
The Locator feature is triggered from the Pegasus Utility. It causes the LEDs to blink orange and blue
for one minute. That action helps you find the specific drive. See
“Locating a Physical Drive” on page
Drive Carrier LEDs
State
Power /Status
Drive Activity
Dark
No power
No drive in carrier
Steady Blue
Power is present
Drive is present
Flashing Blue
—
Activity on drive
Blinking Blue and Orange
Locator feature or Drive is rebuilding
—
Red
Drive error or failure
—
Power / Status
Drive Activity
Drive carrier LEDs
Power/Status LEDs blink blue and orange
Locate feature on a drive carrier
Summary of Contents for Pegasus32 R4
Page 1: ...Pegasus32 R4 R6 R8 Product Manual Version 1 1 2020 Promise Technology Inc All Rights Reserved ...
Page 9: ...ix About this guide Pegasus32 Product Manual WARNING WARNING ...
Page 101: ...85 Managing the Pegasus32 Pegasus32 Product Manual Controller Settings ...
Page 201: ...185 Troubleshooting Pegasus32 Product Manual View NVRAM Events ...