![background image](http://html.mh-extra.com/html/promise-technology/pegasus32-r4/pegasus32-r4_product-manual_1617249156.webp)
140
Promise
Technology
Pegasus32 Series
Performing a Manual Rebuild
To perform a manual rebuild:
1. Click on the
Background Activities
icon.
2. Mouse-over Rebuild and click the
Start
button.
3. From the
Source Physical Drive
dropdown menu, choose a
Source
disk array and physical
drive.
Arrays have an ID No. Physical drives have a Seq. No.(sequence number)
4. From the
Target Physical Drive
dropdown menu, choose a
Target
physical drive.
5.
In the Confirmation box, type the word “confirm” in the field provided and click the
Confirm
button.
When the disk array is rebuilding:
•
The disk array shows a green check
icon and
Rebuilding
status.
•
Logical drives under the disk array continue to show a yellow
icon and
Critical,
Rebuilding
status.
• If the buzzer is enabled, the Pegasus unit emits two quick beeps every five seconds. When
the beeps stop, the rebuild is done.
Rebuilding a disk array
Summary of Contents for Pegasus32 R4
Page 1: ...Pegasus32 R4 R6 R8 Product Manual Version 1 1 2020 Promise Technology Inc All Rights Reserved ...
Page 9: ...ix About this guide Pegasus32 Product Manual WARNING WARNING ...
Page 101: ...85 Managing the Pegasus32 Pegasus32 Product Manual Controller Settings ...
Page 201: ...185 Troubleshooting Pegasus32 Product Manual View NVRAM Events ...