34
Promise
Technology
Pegasus32 R4/R6/R8
To Create a Disk Array and Logical Drive
The Pegasus32 is shipped with HDD installed and a RAID array configured, so it is not necessary to do
this yourself. However, if you want to change the disk drives or configure a different RAID, you will need
to create an array and logical drive to use the storage.
If you are installing new disk drives, use the Wizard to create a disk array and logical drive. The
procedures are described in the next chapter.
To see the
Wizard
menu, launch the Pegasus Utility, in the
Dashboard
menu, under
System Status
,
click the Disk Array link. See page 66 for an overview of the Pegasus Utility interface.
The Wizard dialog box opens with three configuration methods.
!
WARNING
If you are using utility to create or delete a disk array or logical drive, the
system will reboot if Pegasus32 is running USB mode. It is important to make
sure the Pegasus32 not being accessed (no IO operation in progress) before
submitting the request.
Summary of Contents for Pegasus32 R4
Page 1: ...Pegasus32 R4 R6 R8 Product Manual Version 1 1 2020 Promise Technology Inc All Rights Reserved ...
Page 9: ...ix About this guide Pegasus32 Product Manual WARNING WARNING ...
Page 101: ...85 Managing the Pegasus32 Pegasus32 Product Manual Controller Settings ...
Page 201: ...185 Troubleshooting Pegasus32 Product Manual View NVRAM Events ...