![background image](http://html.mh-extra.com/html/promise-technology/pegasus32-r4/pegasus32-r4_product-manual_1617249055.webp)
39
Installation and Setup for Windows Users
Pegasus32 Product Manual
Step 3: Power On Pegasus32
Follow these steps to connect the power cord and power on the Pegasus32.
1.
Attach the power cord on the back of the Pegasus32 unit.
to see an illustration of the back of device)
2. Plug the other end into a power source.
3.
Press the Power Button. (See illustration of front of device below).
You will observe that the
Power Button
LED turns orange.
It takes about 30 seconds to boot the Pegasus32 unit. When fully booted:
• The Power Button LED turns blue.
• The drive carrier Power / Status LEDs turn blue.
Pegasus32 boot up LED behavior
Link LED
Power button /
Status LED
Drive Power /
Status LED
Drive Carrier
Drive Activity LED
Summary of Contents for Pegasus32 R4
Page 1: ...Pegasus32 R4 R6 R8 Product Manual Version 1 1 2020 Promise Technology Inc All Rights Reserved ...
Page 9: ...ix About this guide Pegasus32 Product Manual WARNING WARNING ...
Page 101: ...85 Managing the Pegasus32 Pegasus32 Product Manual Controller Settings ...
Page 201: ...185 Troubleshooting Pegasus32 Product Manual View NVRAM Events ...