Promise Technology Pegasus32 R4 Product Manual Download Page 235

Page: 235 / 267

219

Technology Background

Pegasus32 Product Manual

RAID 1E

A RAID 1E Source logical drive can migrate to the following Target logical drives:

Target

Requirements

RAID 0

None.

RAID 1E

Add physical drives.

RAID 5

3 physical drives minimum, 4 (R4), 6 (R6) or 8 (R8).
RAID 1E must have less than 4 (R4), 6 (R6) or 8 (R8) physical drives. If

existing physical drives have no unused space, add 1 or more physical

drives.

RAID 10

4 physical drives minimum. Even number of physical drives. If existing

physical drives have no unused space, add 1 or more physical drives.

RAID 50

6 physical drives minimum.

See “Migrating a Logical Drive” on page 159.

RAID 5

A RAID 5 Source logical drive can migrate to the following Target logical drives:

Target

Requirements

RAID 0

None.

RAID 1E

None.

RAID 5

Add physical drives. Maximum of 4 (R4), 6 (R6) or 8 (R8).

RAID 6

4 physical drives minimum, maximum of 4 (R4), 6 (R6) or 8 (R8). If

existing physical drives have no unused space, add 1 or more physical

drives.

RAID 10

4 physical drives minimum. Even number of physical drives. If existing

physical drives have no unused space, add 1 or more physical drives.

RAID 50

6 physical drives minimum.

RAID 60

8 physical drives minimum.

See “Migrating a Logical Drive” on page 159.

Summary of Contents for Pegasus32 R4











































































































































































































































































Search results

Summary of Contents for Pegasus32 R4

Reviews:

Related manuals for Pegasus32 R4

Brands by name

Popular brands

Promise Technology Pegasus32 R4, Product Manual

Search results

Summary of Contents for Pegasus32 R4

Reviews:

Related manuals for Pegasus32 R4

Brands by name

Popular brands