![background image](http://html.mh-extra.com/html/promise-technology/pegasus32-r4/pegasus32-r4_product-manual_1617249028.webp)
12
Promise
Technology
Pegasus32 R4/R6/R8
Installing Pegasus Driver on your Mac (Thunderbolt only)
If Pegasus32 is connected to a Thunderbolt port on your computer, a Promise Pegasus Driver should
be installed and loaded before you using Pegasus32 on Mac. Follow instructions in the wizard to install
the Promise Pegasus Driver. The final step will be to restart the computer in order to complete the
installation.
If the driver has been installed, skip ahead to step 6 to check your installed version and other
information.
Note
If you get any warning message during installing driver or software, please refer to
“Troubleshooting” on page 179.
1.
Double-click the PKG file for installing the driver; the file name begins with “R_MacDrv” followed
by the version number. The Installer appears. Click
Continue
to begin the installation.
Summary of Contents for Pegasus32 R4
Page 1: ...Pegasus32 R4 R6 R8 Product Manual Version 1 1 2020 Promise Technology Inc All Rights Reserved ...
Page 9: ...ix About this guide Pegasus32 Product Manual WARNING WARNING ...
Page 101: ...85 Managing the Pegasus32 Pegasus32 Product Manual Controller Settings ...
Page 201: ...185 Troubleshooting Pegasus32 Product Manual View NVRAM Events ...