Promise Technology Pegasus32 R4 Product Manual Download Page 144

Page: 144 / 267

128

Promise

Technology

Pegasus32 Series

Choosing Automatic Configuration

To use the Automatic Configuration Wizard:

1. From the Storage menu choose

Wizard

2. Click the

Automatic

button.

The Automatic Configuration dialog box appears.

3. Do one of the following actions:

• If you agree with the proposed configuration, click the Submit button.

The Wizard creates your disk array and logical drive. If you have a Pegasus32 R6, the

Wizard also creates a spare drive.

• If you do NOT agree with the proposed configuration, click the

Cancel

button to return to

the original Automatic Configuration menu.

Automatic Configuration dialog box

Summary of Contents for Pegasus32 R4











































































































































































































































































Search results

Summary of Contents for Pegasus32 R4

Reviews:

Related manuals for Pegasus32 R4

Brands by name

Popular brands

Promise Technology Pegasus32 R4, Product Manual

Search results

Summary of Contents for Pegasus32 R4

Reviews:

Related manuals for Pegasus32 R4

Brands by name

Popular brands