Promise Technology FastTrak TX4310, User Manual

Page: 15 / 134

7
Chapter 2: Installation
• Unpack Your FastTrak Card (below)
• Install the FastTrak Card (page 8)
• Install the Disk Drives (page 9)
• Create Your Logical Drive (page 10))
• WebPAM Installation (page 14)
This Chapter is designed to quickly get your FastTrak TX4310 RAID Controller
card up and running.
If you plan to run the WebPAM software, you must also install the driver
appropriate to your operating system. See “Chapter 3: Install Drivers” on
page 23.
Unpack Your FastTrak Card
When you receive the FastTrak TX4310 RAID Controller card, the package
should contain the items listed below:
•
FastTrak TX4310 RAID Controller Card
• Quick Start Guide
• Four 0.65m (25.6-inch) Serial ATA disk drive data cables
• Two Y power splitter cables
• CD with Drivers, Promise RAID Management (WebPAM) software and
FastTrak TX4310 User Manual
If any of the items are missing or appear to be damaged, please contact your
dealer or distributor immediately.
Warning
The electronic components on the FastTrak RAID Controller card
are sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
FastTrak card or its subassemblies.
Warning
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.