2. Assembly
2
1. Short description
Please read the safety advices on page 13 before installation and keep this user manual for future reference.
1.
After removing the fixing elements, insert the device.
2.
Check the seal to make sure it fits securently.
3.
Click the fixing elements back into place and tighten the clamping screw by hand. Then use
screwdriver to tighten them another half a turn.
ATTENTION! The torque should not exceed 0,1 Nm
!
Dich
tung
48,0
2
4
,0
3,0
54
,0
Ein
ba
uti
efe
in
kl.
An
sch
lus
skl
em
me
°C
1. Short description
2. Assembly
The panel instrument UDA 50 is a 4-digit display for direct voltage / direct current signals and a visual limit
value monitoring via the display. The configuration happens via three front keys or via the optional PC-
software PM-TOOL. An integrated programming lock prevents unrequested changes of the parameter and
can be unlocked again via an individual code.
The electrical connection happens on the rear side via plug-in terminals.
Selectable functions like e.g. the query of the min/max value, a zero point calming, a direct limit value
adjustment in the operating mode and additional measuring support points for linearization complete the
modern device concept.
