22
5. Setting the display
Menu-level
Parameter-level
5.3. Programming lock
RUN
Activation / Deactivation of the programming lock and completion of the standard
parameterization.
run:
Default:
uloc
Here, [
▲] [▼] can be used to select between deactivated key lock (factory setting) and
activated key lock
Loc
. The selection is made with
[P]
. After this, the display confirms the
settings with
„
- - - -
„
and automatically switches to the operating mode. If
Loc
was selected, the
keyboard is locked. To enter the menu level again,
[P]
must be pressed for 3 seconds in the
operating mode. The
CODE
that now appears (factory setting
1 2 3 4
) is entered with [
▲] [▼] and
[P]
and unlocks the keypad. An incorrect entry is displayed with
FAIL
.
Menu-level
Parameter-level
Assignment (deposit) of key functions,
Tast
:
Default:
no
Here, either a min/max value query or a limit value correction can be stored on the direction
keys for the operating mode. If the min/max memory is activated with
EHER
, the measured
min/max values are stored during operation and can be retrieved via the direction keys [
▲] [▼].
The values are lost when the device is restarted. If the limit value correction
LI.1
, is selected, the
values of the limit values can be changed during operation without interfering with the operating
sequence. If
No
is parameterized, the direction keys [
▼] [▲] have no function in the operating
mode.
Display flashing,
FLAS:
Default:
no
Here a display flashing can be added as an additional alarm function either to the first limit
value (selection:
LI-1),
to the second limit value (selection:
LI-2
) or to both limit values (selection:
LI-12
). With
No
(factory setting) no blinking is assigned.
5.4. Extended parameterization
If the [
▲] & [▼] keys are pressed for one second during standard parameterization, the display changes to the
extended parameterization mode. The operation is the same as in the standard parameterization.
