4. Function description and operation
20
4. Function description and operation
4.1. Programming above configuration software PM-TOOL:
Part including the software on CD, is a USB cable with device adapter. The connection is made via a 12-pin
micromatch connector on the back of the device and to the PC side with a USB connector.
System requirements: PC with USB-interface
Software: Windows XP, Windows VISTA
With this tool the device configuration can be generated, omitted and saved on the PC. Through the easy-to-
use program interface, the parameters can be changed, and the mode of operation and the possible selection
options are specified by the program.
ATTENTION!
When setting parameters with a measuring signal applied, make sure that the measuring signal has no ground
reference to the programming plug.
The programming adapter is not galvanically isolated and directly connected to the PC. Reversing the polarity
of the input signal can cause a current to flow through the adapter and destroy the device and connected
components!
Level
Button
Describtion
Menu-level
Change to the parameter level and the stored parameters.
Used to navigate in the menu level.
Parameter-level
Used to confirm the performed parameterization.
Adjusting the value or setting.
Operation:
The operation is divided into two different levels.
Menu-level:
Here you can navigate between the individual menu items.
Parameter-level
:
The parameters stored in the menu item can be parameterized here.
Functions that can be adjusted or changed are always signaled with a flashing of the display. The settings made
in the parameter level are always confirmed with
[P]
and thus saved.
However, the display also automatically saves all adjustments and switches to operating mode if there are no
further key operations within 10 seconds.
Menu-level
Parameter-level
Example:
