Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
51
www.promega.com
TM320 · Revised 4/15
8236T
A
4.
To change a custom method name or PIN in the
User Protocols
screen, select the existing custom protocol
name to be changed, and press the Run/Stop button. In the next
User Protocols
screen, select
Edit
. If the
method is PIN-protected, enter the PIN. In the next
User Protocol
screen select
Administration
to open
the
User Protocol Options
screen.
8237T
A
5.
To change the protocol name, select
Edit/Add Protocol Name
; use the keyboard to enter the new name.
To change a protocol PIN, select
Edit/Add PIN,
and use the keypad screen to add and confirm the new PIN.
To remove the protocol name or PIN, choose
Remove Protocol Name
or
Remove PIN.
After confirming that
you wish to remove a name or PIN, the instrument will remove these settings.
The user-defined methods may be run by selecting
User
in the
Protocols
screen (see Section 5.A).
Figure 40. Edit run parameters.
Figure 41. User Protocol Options.
