24
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM320 · Revised 4/15
www.promega.com
5.A. Preprogrammed Methods (continued)
3.
A confirmation screen allows you to verify that the correct selection has been made. If correct, press Run/
Stop, and you will be prompted to open the door to load the samples. Press the Run/Stop button. Open the
door. The cartridge rack will extend, ready for sample loading. Follow the steps in Section 5.B and 5.C to
gather the run data and perform the run. Follow the steps in Section 6 to generate the run reports.
Important.
At this point there are di
ff
erent paths forward, depending on whether the run data reporting
options are being used. See Section 5.B for more information.
Setting Up a Run in the LEV Mode
1.
The Home screen must indicate LEV. Select Run. Select the User, and add the matching PIN if appropriate.
Pressing the Run/Stop button opens the
Protocols
screen. From this screen, you can select a protocol.
8232T
A
2.
Choose a protocol according to the Maxwell
®
reagent kit technical manual.
• Select
User
to access and run custom protocols. Instructions for setting up customized protocols are
presented in Section 10.A. Select the method required.
• Select
Other
to access specialized protocols for
Fixed Yield DNA
and to access a
Demo
option.
Fixed Yield DNA
purifies a limited amount of DNA, allowing a reproducible amount of DNA to be
captured between samples.
The
Demo
protocol is for demonstration purposes only and should not be used for sample
purification.
Please contact Promega Technical Services at
for more information on these
specialized options.
Figure 22. Protocols Screen.
!
