Promax HD Ranger Lite, User Manual

Page: 161 / 184

July 2015
35
3
Commands should always be sent in capital letter and cannot be edited online,
i.e., once a character is received it is stored in the
HD
RANGER
Lite buffer and
cannot be rectified by sending an erase code.
Commands in remote control are divided into two groups, orders and
interrogations. Orders modify a variable or the equipment status. Interrogations
respond with information concerning equipment status or the value of a variable.
For interrogative command, it is necessary to add the character ´?´ after the
character '*'.
A4.4
Virtual Serial Port Configuration
In order to ensure error-free communication between the computer and the
HD
RANGER
Lite you must programme following communication parameters
into the control console via USB:
Rate : 115200 bits/s
Data bits : 8 bits
Parity : No
Stop Bits : 1