9-104
July 2015
2
9.2.2
SCD/EN50494 (SatCR) commands
By means of function SCD/EN50494 (international standard, also known as
SatCR) it is possible to control the devices of a TV satellite installation that are
compatible with this standard, which allows to concentrate downlink frequencies
(slots) by an only cable. By this way each user using a slot can tune and decode
any signal present in the satellite.
Connect the RF cable (
see Figure 6
) to the RF connector for the input
signal of the equipment.
Press the
Spectrum
key
to access the Spectrum analyser mode.
Press the
Settings
key
and select the satellite band.
Select the polarization (horizontal/vertical) and the satellite band
(high/low).
If necessary, enable the
Supply output
and select the supply voltage
for the LNB.
In the option SCD/EN50494, select ON to enable it. It appears the
icon at the top right corner.
Also in the SCD/EN50494 option, select
Configuration
to access
SCD/EN50494 parameters.
Figure 66
.
SCD/EN50494
command screen.
Summary of Contents for HD Ranger Lite
