Promax HD Ranger Lite, User Manual

Page: 92 / 184

7-84 July 2015
1
Press the Tools key.
Select the Field Strength option and in the drop down menu select
On .
Select again the Field Strength option, now select the new option that
appears, called Configuration .
In the configuration window enter the antenna calibration parameters,
by hand or selecting one of the available antenna types (data of
different antenna types should be imported by the user. Refer to the
following section).
Now access the Spectrum Analyser or Measurement mode to check
the field strength measure shown as FSM (dBµV/m). This measure
replaces the power.
Figure 55.
Once finished, return to the Tools menu and in the Field Strength
option select Off .
WARNING : Some tools (Constellation, Echoes, MER by carrier, Merogram ...) are
disabled when the
Field Strength option is enabled. Remember to
turn off this option if you want to use these other tools.