Promax HD Ranger Lite, User Manual

Page: 40 / 184

3-32 July 2015
667777777777888888
3.2 Operation
Connect the RF input signal to the equipment.
Select through the “Settings” menu the frequency band (terrestrial or
satellite).
Access the MEASUREMENT option by pressing the key.
Press again to display the next view.
Views for digital signals are:
MEASUREMENT 1/3: FULL MEASUREMENT
Figure 24.
Selected installation, date and time.
Measurement value of the selected parameter.
Number of view/total views.
Selected band, battery level.
Total power detected over the whole selected band (terrestrial or satellite).
It also shows the link margin measurement. The total power can be used
to know when it is close to saturation. The link margin is the margin of
safety remaining for a good reception.
Graphical measurement of the selected parameter.
Measurement values for the type of locked signal.
Signal status (searching/locked/multiplex name).
Softkeys menus.
►
Joystick up/down : It changes selected parameter.
►
Joystick left/right : It changes channel/frequency.