Promax HD Ranger Lite User Manual Download Page 135

Page: 135 / 184

July 2015

A1.1.5

Digital CABLE television signal of FIRST generation
(DVB-C standard/QAM modulation)

DVB-C Parameters

►

Bandwidth channel

It displays the channel bandwidth up to 9.2 MHz.

►

Spectral inversion

It detects if the input signal has been inverted.

►

Symbol Rate

It represents the number of times the signal status changes in a period of
time. The bandwidth is related to this parameter.

►

Roll-Off Factor

Roll-off factor of Nyquist filter. It indicates the bandwidth excess over the
ideal bandwidth.

►

Constellation

Modulation used by the carriers. It also defines immunity to the system
noise (16QAM, 32QAM, 64QAM, 128QAM and 256QAM).

Summary of Contents for HD Ranger Lite

























































































































































































Search results

Summary of Contents for HD Ranger Lite

Reviews:

Related manuals for HD Ranger Lite

Brands by name

Popular brands

Promax HD Ranger Lite, User Manual

Search results

Summary of Contents for HD Ranger Lite

Reviews:

Related manuals for HD Ranger Lite

Brands by name

Popular brands