Promax HD Ranger Lite User Manual Download Page 11

Page: 11 / 184

July 2015

2-3

2 SETTING UP

2.1

Package Content

Check that your package contains the following elements:

RANGER

Lite

Analyser.

External DC charger.

Mains cord for external DC charger.

Car lighter charger.

"F" Adapters (2 units).

•

"F" / H - DIN / H Adapter.

•

"F" / H - "F" / H Adapter.

Support belt and carrying bag.

USB On-the-go (OTG)(A) Male - Mini USB (B) Male cable.

USB cable (A) Female - Mini USB (B) Male cable.

Quick Start Guide.

NOTE

Keep the original packaging, since it is specially designed to protect the
equipment. You July need it in the future to send the analyser to be
calibrated.

Summary of Contents for HD Ranger Lite

























































































































































































Search results

Summary of Contents for HD Ranger Lite

Reviews:

Related manuals for HD Ranger Lite

Brands by name

Popular brands

Promax HD Ranger Lite, User Manual

Search results

Summary of Contents for HD Ranger Lite

Reviews:

Related manuals for HD Ranger Lite

Brands by name

Popular brands