Promax HD Ranger Lite, User Manual

Page: 39 / 184

July 2015
3-31
6
3 MEASUREMENT MODE
3.1 Introduction
On the panel left side, the equipment has three functions keys, which give direct
access to the three most important functions. One of them is the key
MEASUREMENT that measures the signal received through the RF input
connector.
The user should connect a signal to the input and select the band, whether
terrestrial or satellite. Then the auto-identification function (for more information
refer to "StealthID function") locks the signal and demodulates it in real time,
automatically detecting its characteristic parameters.
Having identified the signal, the equipment measures according to the signal
type. All information about transponders or multiplex is automatically displayed
without introducing any additional parameter identification.
Next there is a list of signals that the equipment can automatically detect. For
more information about characteristics of each signal type refer to Annex 1:
Signals description.
Digital Terrestrial Television First Generation (DVB-T)
Digital Terrestrial Television Second Generation (DVB-T2: T2-Base and
T2-Lite profiles)
Digital Satellite Television First Generation (DVB-S)
Digital Satellite Television Second Generation (DVB-S2)
Digital Satellite Television, exclusive for DirecTV (DSS)
Digital Cable Television First Generation (DVB-C)
*
Digital Cable Television Second Generation (DVB-C2)
Generic
1
Analogue terrestrial TV
Analogue Cable TV
Analogue Satellite TV
*
User has to enter the symbol rate in order the equipment detects the DVB-C signal.
1
For this signal type refer to "Generic Signal" paragraph.