Promax HD Ranger Lite, User Manual

Page: 79 / 184

July 2015
7-71
1
Figure 46.
In the next window, the user can select an option to capture de
service list when performing the datalogger (this option slows down
the process but provides more information). Another option allows the
user to enable a pause between channel plans (the process stops until
the user wants to carry on). There is also the option to perform a
datalogger on the attenuation test, terrestrial or satellite (see section
"Attenuation Test" under "Tools" for more information).
Figure 47.
At the last step, user can select to open the just created new
datalogger (by default, this option is selected).
Once a new datalogger is created or selected an already existing one,
it shows the datalogger viewer screen and measurements of test
points can start.
If it is a new datalogger, in first place before starting the datalogger,
user must create a new test point (see next section).