Promax HD Ranger Lite User Manual Download Page 17

Page: 17 / 184

July 2015

2-9

2.5

Screen Icons and Dialog boxes

On the screen are some icons that provide useful information to the user about
the current status of the instrument.

Battery charging.

Warning.

Battery not charging.

Yellow level indicates

charge left.

USB flash drive inserted.

USB in serial port mode.

LTE filter enabled.

Satellite band.

Current installation.

Current voltage, 22 kHz

signal and LNB power

level

SATCR (SCD/EN50494)

commands enabled.

Terrestrial band.

JESS (SCD2/EN50607)

commands enabled.

Compressed
installation.

Task scheduled.

OK.

Multi-function

Joystick

enabled. Two-letter code

indicates the exact function:

Searching.

Frequency tuning.

Channel tuning.

Span change.

Marker moving.

Echo/zoom change.

Summary of Contents for HD Ranger Lite

























































































































































































Search results

Summary of Contents for HD Ranger Lite

Reviews:

Related manuals for HD Ranger Lite

Brands by name

Popular brands

Promax HD Ranger Lite, User Manual

Search results

Summary of Contents for HD Ranger Lite

Reviews:

Related manuals for HD Ranger Lite

Brands by name

Popular brands