Promax HD Ranger Lite User Manual Download Page 57

Page: 57 / 184

July 2015

5-49

TV 3/3: SCREEN TV + SERVICE DATA

∗

Figure 37.

Selected installation; date and time.

Tuned service image.

Tuned service information.

►

TYPE

Encoding type and video transmission rate.

►

FORMAT

Resolution (horizontal x vertical), aspect ratio and
frequency.

►

PROFILE

: Profile

level.

►

PID

Video program identifier.

Number of view/total views.

Selected band; battery level.

Tuned service information.

►

NETWORK:

Television distribution network (Terrestrial). Orbital
position (Satellite).

►

PROVIDER

Program provider name.

►

NID

Network identifier where the signal is distributed.

►

ONID

Identifier of the original network where the signal
originates.

►

TSID

Transport stream identifier.

►

SID

: Service

Identifier.

►

App. Type

Type of detected interactive service (HbbTV, MHP,
MHEG...).

►

LCN

Logic Channel Number. It is the first logic number
assigned to the first channel in the receiver.

∗

Only available for digital channels.

Summary of Contents for HD Ranger Lite

























































































































































































Search results

Summary of Contents for HD Ranger Lite

Reviews:

Related manuals for HD Ranger Lite

Brands by name

Popular brands

Promax HD Ranger Lite, User Manual

Search results

Summary of Contents for HD Ranger Lite

Reviews:

Related manuals for HD Ranger Lite

Brands by name

Popular brands