12 PRODIGIT
Chapter 2 Installation
2-1. Inspection
The 3350F Series high power load was carefully inspected before shipment. If instrument
damage has occurred during transport, please inform Prodigit's sales and service office or
representative.
Your 3350F Series high power load was shipped with a power cord for the type of outlet used
at your location. If the appropriated cord was not included, please contact your nearest
Prodigit sales office to obtain the correct cord. Refer to “check line voltage “to check the line
voltage selection and fuse type.
2-2. Check line voltage
The 3350F Series high power load can operation with 115, 230Vac input as indicated on the
label on the rear panel.
Make sure that the factory check mark corresponds to your nominal line voltage. Skip this
procedure if the label is corrected marked.
2.2.1. With the 3350F Series load power OFF, disconnect the power cord.
2.2.2. Refer the drawing on the rear panel of 3350F Series high power load in Fig 2-1, set
The switches to the proper voltage as describe in the following:
Fig 2-1 SET OF SWITCH
Voltage selection switch
Voltage configuration
