60
PRODIGIT
TABLE 4-12 MODEL NUMBER
[SYStem
：
] *RST
Command Syntax
:
[SYStem
：
] *RST {
；
NL}
Purpose:
330XF Mainframe reset.
Description
:
This command is 330XF Mainframe reset.
[SYStem
：
] REMOTE
Command Syntax
:
[SYStem
：
] REMOTE {
；
NL}
Purpose:
Command to enter REMOTE status (only for RS232)
Description
: This command is for enabling control of the unit via RS232.
[SYStem
：
] LOCAL
Command Syntax
:
[SYStem
：
] LOCAL {
；
NL}
Purpose:
Command to exit the REMOTE status (only for RS232)
Description
: This command closes the RS232 control interface.
4.6.5.
MEASUREMENTS
– This set of commands allows the programmer to measure
The actual voltage at the load terminals and the current being taken.
MEASure
：
CURRent
？
Command Syntax
:
MEASure
：
CURRent
？
{
；
NL}
Purpose:
Measures the load current.
Description:
Reads the current meter. The engineering unit is Ampere (A)
MEASure
：
VOLtage
？
Command Syntax
:
MEASure
：
VOLtage ?{
；
NL}
Purpose:
Measures the load voltage.
Description
: Reads the voltmeter. The engineering unit is Voltage (V)
MEASure
：
POWer
？
Command Syntax
:
MEASure
：
POWer?{
；
NL}
Purpose:
Read the power being taken by the load.
Description
: Reads the power meter. The engineering unit is Watt (W)
MODEL
3310F
3330F
3340F/G 33401F/G
3311F
3332F
3341F/G
3312F
3336F
3342F/G
3314F
3343G
3315F
