56
PRODIGIT
[STATe
：
] PRESet {SP}{ON
OFF}
Command Syntax
:
[STATe
：
] PRESet {SP}{ON
OFF}{
；
NL}
[STATe
：
] PRESet ? {
；
NL}
Purpose:
Reads back whether load is in preset mode.
Description:
This command is used to check if the load is in preset mode.
0 = Preset mode OFF
1 = Preset mode ON
[STATe
：
] SENSe{SP}{ON
OFF
AUTO}
Command Syntax
:
[STATe
：
] SENSe{SP}{ON
OFF
AUTO }{
；
NL}
[STATe
：
] SENSe
？
{
；
NL}
Purpose:
Reads back whether the sense function is ON or OFF
Description:
0 = Sense OFF or Sense AUTO
1 = Sense ON
[STATe
：
] LEVel {SP}{HIGH
LOW} or LEV {SP}{HIGH
LOW}
Command Syntax
:
[STATe
：
] LEVel {SP}{HIGH
LOW }{
；
NL}
[STATe
：
] LEVel ? {
；
NL}
[STATe
：
] LEV{SP}{HIGH
LOW}{
；
NL}
[STATe
：
] LEV? {
；
NL}
Purpose:
Reads back whether the load is operating at its LOW or HIGH LEVEL
Description:
In CC, CR, CV or CP operating modes the user can set 2 LEVELS of
Load current, resistance, voltage or power. The load will read back which level it is
At:
0 = Load operating at low level
1 = Load operating at high level
[STATe
：
] DYNamic{SP}{ON
OFF}
Command Syntax
:
[STATe
：
] DYNamic{SP}{ON
∣
OFF}{
；
NL}
[STATe
：
] DYNamic
？
{
；
NL}
Purpose:
Reads back whether the load is operating in STATIC or DYNAMIC mode
Description
:
0 = Dynamic operation
1 = Static Operation
[ STATe
：
] CLR
Command Syntax
:
[ STATe
：
] CLR {
；
NL}
Purpose:
Clears the error flag
Description
: This command is used for clearing the contents of the PROT and ERR
registers. After execution, the contents of these two registers will be “0”.
