3302F Mainframe Operation Manual 19
The “XX” part is the test step
(1 to 16 is possible).
2.
Once the auto-sequence number has been selected the
Memory location of the first test step can be selected. The
Arrow keys next to the 3302F LCD are used to select the
Memory BANK and memory STATE.
Once the desired location has been selected press ENTER
Next the total test time for that step (T1+T2) can be entered.
T1 is the test time without checking the NG/LIMIT settings.
T2 is the test time where if NG is ON the LIMIT settings will
be checked. The upper arrow keys are used to set T1 and
the lower arrow keys are used to set T2. The time setting
can be adjusted in the range of 0.1s to 9.9s in 100ms
Increments. Please see sections 3.2.7 and 3.2.8 for a
Definition of T1 and T2.
3.
Press ENTER to set the next setting step. Repeat the same
Process for each setting steps. Up to 16 steps can be
Entered.
Once the T1 and T2 settings have been entered for the final
Step press the STORE button. The LCD will now show REP.
