3302F Mainframe Operation Manual 17
3.4.2.1. How to STORE a load set up:
1. Adjust Electronic Load to desired status and settings.
2. With the UP and DOWN keys on the mainframe select the bank
(1 to 15) in which you will store the set up
3. Press the store key on the mainframe. The store key starts flashing.
(If you no longer wish to store a setting you can press the exit button or
Wait about 20 seconds for the unit to automatically exit the store
Operation).
4.
While the store light is flashing press a one of the number keys (1 to10)
Where the set-up is to be saved. The store light will go out and the
Numbered key pressed will stay illuminated. This indicates the set-up
Has been saved to that location.
3.4.2.2. How to RECALL a saved set up.
First select the memory bank by using the up and down arrow buttons.
Pressing one of the numbered state buttons will recall the previously
saved load configuration. The electronic load will immediately switch to the
previously saved set-up changing the load values, operation mode and
limits accordingly.
3.4.3.
WAKE-UP Function
The wake up function is designed to automatically recall a setting at mains power on.
Step 1 Press WAKE UP once or twice so that message SET is displayed on the
3302F LCD.
