18 PRODIGIT
Step 2 Select the memory location (bank and state) that is to be used. Once the
Correct location has been selected press the STORE key. This example below
Shows bank 01 state 01. After pressing store key the LCD will revert to the
Normal message.
Step 3 Use the mains switch on the front panel to power down the unit.
Step 4 At mains power on the unit will automatically recall the previously saved
Set-up from the nominated memory location.
Step 5 To clear the settings, press the wake up key once or twice so that the LCD
Shows clear. Now press them STORE key to cancel the previously set
Wake up function.
3.4.4.
AUTO-SEQUENCE
An auto-sequence allows the user to step through previously saved set-ups stored in
the mainframe’s memory. Up to 9 auto-sequences can be saved. Each auto-sequence
can consist of up to 16 steps. There are two modes in the auto-sequence function.
These are edit mode and test mode.
3.4.4.1
Edit Mode
1.
Press EDIT key, then EDIT button will become lit and the
LCD will display "FX-XX". This is defined as follows:
The “FX” part indicates the auto-sequence number
(F1 to F9 are possible). The numbered STATE keys are
Used to select the auto-sequence number
