77
>>
assemBlING tHe CoPING
figure 57
w
read the installation
instructions carefully
and pay scrupulous
attention to the
indications concerning
wiring. in case
of doubt, call a
professional.
caUtion
w
Note the distribution of the various modules constituting the coping of your pool,
arrange them leaving a gap of +/- 10mm between each two and a regular overlap
around the inner periphery of the pool. (+/- 30mm).
w
Screw them onto the metal plates using the screws 6x20 (bag G).
w
Clip the junction strips into position (see page 70).
>>
uNdeRwateR lIGHts
w
To finalise installation of the underwater lights, refer
to the installation instructions enclosed with the
underwater light and the control panel.
Once the underwater lights have been installed,
continue filling the pool until the water level is
2/3 of the way up the skimmer mouth.
figure 58
figure 59
pOOL 4X8
pOOL 3X6
