66
>>
RECTANGULAR POOLS
>>
Pool FIttINGs (sKImmeR)
w
First, mount the skimmer prefix flange using the slotted countersunk head wood
screw) screws (VB FZ) 3x25. You will find these components in the Pool Fitting
skinpack.
Attach the grey tube L.325 (see page 65 ref l10) to the body of the skimmer, then,
working from outside the pool, put the skimmer in position taking care to position
it flat against the prefix flange. Hold it in place with the pozi countersunk head (TFZ)
screws M5x16 + nuts and washers. Stick the first self-adhesive gasket (Pool Fitting
skinpack) to the front of the skimmer. Take care to ensure that the holes line up
correctly.
figure 31 a
figure 31 B
figure 31 c
figure 31 D
w
when fastening
pool fittings in
position, avoid
overtightening the
screws as this could
crack the fitting.
Hand tighten by
preference.
Skimmers
caUtion
