74
>>
RECTANGULAR POOLS
w
Connect the rigid descending pipes and the filtration group as illustrated in the diagram
below. The filtration kit supplied with your pool is sized for installation of the filtration
group 3.5m from the pool, pipe and tube lengths are indicative. They will need to be
modified as a function of your pool configuration. Make sure that you calculate and cut
the various lengths as a function of the rolls of tubing provided.
AdVICE
Use silicon grease
or soapy water to
facilitate insertion of
the pipes.
Before connecting
the pipes, make sure
that the protective
rubber bands
intended to cover the
torro clamps after
tightening are in
position.
w
Assemble the 4-way manifold (F) module (Fig 48’’) and screw it into position at the
pump inlet. Don’t forget to use the o-ring provided in the pump pack.
w
After applying a few rounds of Teflon, screw the reducing union
A
onto the pump body.
Then, without forgetting the Teflon, screw the barbed union
B
into the reduction union.
(fig 48’).
w
Cut a length of tube to length and connect it as illustrated between the pump outlet
and the 6-way valve.
PUMP/FILTER & MAnIFOLd
figure 48
figure 49
skimmer
1
skimmer
2
vacuum
point
return
waste
main drain
f
suction
filter
figure 48’
figure 48’’
