EMBEDDED UNDERWATER LED SWIMMING POOL LIGHT
HIDRO-SPOT60H
INSTALLATION AND MAINTENANCE MANUAL
Please read this operation manual carefully and keep it for future reference.
Page 1: ...EMBEDDED UNDERWATER LED SWIMMING POOL LIGHT HIDRO SPOT60H INSTALLATION AND MAINTENANCE MANUAL Please read this operation manual carefully and keep it for future reference ...
Page 2: ...water 5 Never operate this light for more than 1 minute unless it is totally submerged in water 6 All lights are required to be disconnected from the main electricity before any operation of maintenance 7 Maximum depth range for the light installation 1 10 meter 8 Maximum water temperature range for the light 20 35 1 Technical Parameters Power 12V 24V AC DC Power High Power LED 1W 3W Dimensions mm...
Page 3: ...ter 2 2 Installation Notes 1 Make sure to install the niche housing on a vertical wall of the pool 2 Make sure the top of the light should be at least 450mm below normal water surface 3 Backup wire coiled within the niche need to be long enough to reach to the ground for the convenience of replacing 4 The junction box or the 12V low voltage transformer should be located at least 300mm above the wa...
Page 4: ...controller One remote control device can be adapted to 30 pool lights simultaneously within 100 meters 4 Maintenance and Replacement 1 There is no maintenance required for this light It is designed to be used only once meaning that replacement is necessary if it becomes defective The repairing is impossible 2 Before servicing the light always disconnect power at the circuit breaker to it Make sure...
