![background image](http://html.mh-extra.com/html/pro-point/9028002/9028002_manual_1607385018.webp)
(softwood). Increase the drill speed until the bore hole is
smooth with clean edges.
8. Pull down on the feed handle and slowly drill a hole into the
workpiece.
9. Once the desired depth is reached, slowly push the feed handle up
until the drill bit clears the workpiece.
10. Turn the drill off and wait for the drill bit to stop. Remove or
reposition the workpiece.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical replacement
parts when servicing.
3. Only use accessories intended for use with this tool. Follow
instructions for changing accessories.
4. Keep the tool handles or gripping surfaces clean and dry.
5. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
6. Clear the vents of any dirt, dust and debris on a regular basis to
prevent the tool from overheating.
WARNING! Only qualified service personnel should repair
the tool. An improperly repaired tool may present a hazard
to the user and/or others.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws
for electronic devices, batteries, oil or other toxic liquids.
9028002
VARIABLE-SPEED FLOOR-MOUNT DRILL PRESS
V1.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 18