![background image](http://html.mh-extra.com/html/pro-point/9028002/9028002_manual_1607385010.webp)
ASSEMBLY & INSTALLATION
BEFORE STARTING
1.
Remove the protective coverings from the base, the column and
the head assembly.
2. Strip the protective oil coat from the table and the column using
household grease removers.
3. Apply a coat of paste wax on the table and the column to prevent
rust.
4. Wipe all parts thoroughly with a clean, dry cloth.
5. Clean the chuck’s tapered hole and the spindle nose to ensure that
the chuck will be seated properly. Use cleaning solvents if
necessary.
ASSEMBLING THE BASE AND THE
COLUMN
1.
Before assembly, bolt the base to a flat, level
and solid floor capable of supporting the
weight of the drill press and any workpieces.
Verify that the installation surface has no
hidden utility lines before drilling or driving
screws.
2. Mount the column onto the base. Align the
holes in the column support with the holes in
the base.
3. Secure in place using the bolts and washers.
Tighten all bolts with a wrench (Fig. 2).
4. Remove the rack from the column by
loosening the collar set screw and removing
the collar. The rack is stowed in this position
only for transit purposes.
5. Lubricate the worm gear with light grease and
insert shaft first into worm gear housing in the
Fig. 2
Fig. 3
9028002
VARIABLE-SPEED FLOOR-MOUNT DRILL PRESS
V1.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 10