![background image](http://html.mh-extra.com/html/pro-point/9028002/9028002_manual_1607385006.webp)
material as the point may move around under pressure, damaging
the workpiece.
a. Ensure the bit shank size matches the tool’s chuck or collet
size.
b. Tighten the chuck so the shank is tightly held with no room to
move.
3. Do not use the drill press as a router or try to elongate or enlarge
holes with the drill bit. The drill bit can break and can cause an
injury.
4. Never attempt to change the rotation direction while the switch is
ON. To do so, may damage the interlock feature built into the
switch. Be sure the switch is OFF and the motor has completely
stopped before changing the rotation direction.
5. Hardened gum and wood pitch on a drill bit slows the drill press
down and increases the potential for binding. Remove the drill bit
from the drill press, then clean it with hot water, kerosene or gum
and pitch remover. Never use gasoline. Allow to dry before using.
Discard the drill bit if the gum or pitch cannot be removed.
6. Clean the drill press's air vents often. The motor’s fan will draw
dust and other particulates into the tool. Excessive accumulation of
wood, plastic or metal particulates can create a fire or electrical
hazard.
7.
Do not cool the drill bit with any liquid when hot. This can damage
the the drill bit by weakening the material, making the accessory
unsafe for use.
8. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical replacement
parts when servicing.
9. Do not install or use any drill bit that exceeds 175 mm in length or
extends 150 mm below the chuck jaws. The drill bit can suddenly
bend outward or break.
10. Do not use wire wheels, router bits, shaper cutters, circle cutters or
rotary planers on this drill press.
11. Remove adjusting keys and wrenches before using the tool. The
tool may eject an attached wrench or a key and cause an injury to
you or a bystander.
9028002
VARIABLE-SPEED FLOOR-MOUNT DRILL PRESS
V1.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 6