![background image](http://html.mh-extra.com/html/pro-point/9028002/9028002_manual_1607385016.webp)
6. The depth is set.
FLEXIBLE LAMP
1.
Bend the lamp's shaft to an angle that will
illuminate the workpiece. Make sure it will not
interfere with the task.
2. Press the lamp switch to turn the light on.
3. Press the lamp switch again to turn the light
off once the task is complete.
CORRECT DRILLING SPEED
This chart is limited to twist drill bits only. Consult
the manufacturer's recommended operating speed for other types of
drill bits.
Twist
Drill Bit
Size
Softwood
Hardwood
Acrylic
Brass
Aluminum
Steel
1/8 to
3/16 in.
(3 to 5
mm)
3,000
RPM
3,000 RPM
2,500 RPM
3,000
RPM
3,000 RPM
3,000
RPM
1/4 to
3/8 in. (6
to 10
mm)
3,000
RPM
1,500 RPM
2,000 RPM
1,200
RPM
2,500 RPM
1,000
RPM
7/16 to
5/18 in.
(11 to 16
mm)
1,500
RPM
750 RPM
1,500 RPM
750
RPM
1,500 RPM
600
RPM
11/16 to
1 in. (17
to 25
mm)
750 RPM
500 RPM
Inadvisable
400
RPM
1,000 RPM
250
RPM
ON/OFF BUTTON
1.
Position the drill bit so it is not touching anything.
2. Press the ON/OFF button to start the drill press. The drill bit will
immediately begin rotating.
3. Press the ON/OFF button again to turn the tool off.
Fig. 16
9028002
VARIABLE-SPEED FLOOR-MOUNT DRILL PRESS
V1.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 16