![background image](http://html.mh-extra.com/html/pro-point/9028002/9028002_manual_1607385019.webp)
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to
the steel parts to avoid rust. Remove the lubricant before using the tool
again.
1.
Components should be kept dry, with machined surfaces lightly
oiled.
2. Always remove drill bits and store in a safe place.
3. Never store equipment in a wet/damp environment.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not
function properly or parts are missing. If unable to do so, have a
qualified technician service the tool.
Problem(s)
Possible Cause(s)
Suggested Solution(s)
The drill press
will not start.
1.
Supplied power is
interrupted.
2. On/Off switch is faulty.
3. Motor components are
defective.
4. Motor has overheated.
1.
Check that power supply is
still available.
2. Replace faulty switch.
3. Have a qualified technician
service the tool.
4. Allow motor to cool before
attempting to use.
Motor starts
slow and
doesn't reach
operation
speed.
1.
Motor is damaged.
2. Extension cord is too
long or wire gauge is
too thin.
1.
Have a qualified technician
service the tool.
2. Eliminate the use of an
extension cord. If an extension
cord is needed, use one with
the proper diameter for its
length and load.
Tool is making
unusual
sounds.
1.
The drill press's parts
may be rubbing or
binding.
2. Belt too loose (slipping)
or too tight (bearing
damage).
1.
Check for obstructions or
misaligned tool components.
Lubricate, repair or replace the
components based on the
particular problem.
2. Properly tension belt.
V1.0
VARIABLE-SPEED FLOOR-MOUNT DRILL PRESS
9028002
Page 19
Assistance available at www.princessauto.com or 1-800-665-8685