89
9
Master Control
StudioLive™ Series III
9.5
DAW Button
Owner’s Manual
9.5
DAW Button
按钮
Your StudioLive can act as a control surface for the mixer functions of a computer
running our Studio One, Logic or ProTools software. Press the DAW button to switch
between normal mixing functions and DAW control. To return to normal operation,
press the DAW button again.
你的
StudioLive
可以作为运行
Studio One
、
Logic
或
ProTools
软件的计算机的调音
台功能的控制面。按
DAW
键，在正常混音功能和
DAW
控制之间可以进行切换
。要返回到正常操作，请再次按下
DAW
键。
While operating in DAW control mode, if there are more channels available in the
connected DAW or mixer than there are channel strips on your StudioLive, you can
press the
Prev
and
Next
buttons in the Bank section to switch between banks of
channels.
在
DAW
控制模式下操作时，如果所连接的
DAW
或调音台中的可用通道比
StudioLive
上的通道条多，你可以按
Bank
部分的
Prev
和
Next
按钮，来切换通
道库。
For more information on using your StudioLive mixer as a controller for your DAW
application please review the following addendums:
关于使用
StudioLive
调音台作为
DAW
应用的控制器的更多信息，请查看以下
附录：
• StudioLive Series III Studio One DAW Control Addendum
• StudioLive Series III MCU for Logic DAW Control Addendum
• StudioLive Series III HUI Emulation for ProTools DAW Control Addendum
9.6
Scenes and Projects
场景和项目
As previously mentioned, every parameter on your StudioLive mixer can be
simultaneously stored and recalled later using Projects and Scenes. To access these
libraries, press the Scenes button. This will open the Projects library.
如前所述，
StudioLive
调音台上的每个参数都可以同时存储，以后使用项目和
场景，进行调用。要访问这些库，请按
Scenes
键。可以打开项目库。
The Scene library for each Project is also viewable from this screen. The controls
on the left side of the screen save and load Projects as well as resets the default
routing of your mixer. The controls on the right side on the screen save and load
Scenes within the current Project, as well as resets the default state of every currently
recallable parameter.
在这个图像中，可以查看每个
Project
的
Scene library
场景库。屏幕左侧的控制按
钮，可以保存和加载项目，并重设调音台的默认路由。屏幕右侧的控制按钮，
可以保存和加载当前项目中的场景，并重置每个当前可调用参数的默认状态。
9.6.1
Creating and Recalling Projects
创建和回顾项目
Global System settings and routing are stored within a Project. A Project saves the
following Global parameters:
统一系统设置和路由，被存储在一个项目中。一个项目可以保存以下参数：
