82
9
Master Control
StudioLive™ Series III
9.1
StudioLive Series III FLEX DSP Rack Effects
Owner’s Manual
9.1.2.4
Vintage Plate Reverb
（模拟板式）混响
This reverb effect is inspired by a classic mechanical plate reverb unit and provides
the following parameters:
这个混响效果的灵感，来自于经典的机械板式混响装置，并提供以下参数：
• Predelay.
Sets the length of short delay before the onset of reverberation, lending
a sense of space to the reflections.
设置混响开始前的短延迟长度，给反射带来空间感。
• Reflection.
This control allows you to set the level (in decibels) of the early
reflections. The louder the early reflections, the smaller the room will seem.
这个控制，设置早期反射的水平（分贝）。早期反射越大，房间越小。
• Low Pass.
Use this control to attenuate low frequencies that can muddy a reverb.
这个控制衰减低频，因为低频会影响混响效果。
• LF Damp Freq.
Use this control with create a warmer sound. This will enhance
content at the frequency you set.
使用这个控制，可以创造更温暖的声音。这将在你设定的频率上增强内
容。
• LF Damping Gain.
Sets the level at which the damping frequency will
be boosted.
设定阻尼频率的提升水平。
9.1.2.5
Mono Delay
单声道延迟
This delay effect offers a simple, quick-to-use multi-tapped delay arrangement and
provides the following parameters:
这个延时效果提供了一个简单、快速使用的多插头延时安排，并提供以下参
数：
• Delay Time.
Sets the length of the delay line.
设定延迟线的长度。
• Tap Assign.
Assigns the Tap Tempo to the TAP button.
为
TAP
按钮指定
Tap Tempo
。
• Feedback.
Sets the amount of delayed signal to be fed back to the input of the
effect. Higher settings lead to longer delay tails (and eventually, outright chaos).